21 - 118
31TH AUTOMATIC TRANSAXLE
SHIFT INTERLOCK SOLENOID (Continued)
(6) Remove two (2) solenoid-to-column screws (Fig.
217).
Fig. 217 Solenoid Retaining Screw
1 - SOLENOID RETAINING SCREW (2)
(7) Remove solenoid.
INSTALLATION
(1) Place interlock solenoid into position ensuring
hook on end of solenoid plunger engages gearshift
lever pawl pin. Install and tighten screws (Fig. 218).
Fig. 218 Solenoid Retaining Screw
1 - SOLENOID RETAINING SCREW (2)
(2) Verify gearshift lever is in PARK (P) and con-
nect solenoid connector (Fig. 219).
Fig. 219 BTSI Solenoid Connector
1 - BTSI SOLENOID
2 - SOLENOID CONNECTOR
(3) Install steering column lower shroud.
(4) Install knee bolster (Fig. 220).
Fig. 220 Knee Bolster
1 - KNEE BOLSTER
RS