Chrysler Dodge Caravan 2002 Manual page 1945

21 - 388 T850 MANUAL TRANSAXLE
INTERMEDIATE SHAFT (Continued)
DISASSEMBLY
CAUTION: Do not re-use snap rings when servicing
the intermediate shaft assembly. Discard upon dis-
assembly and install new ones provided with avail-
able snap ring service kit.
(1) Install intermediate shaft assembly to arbor
press table with bearing splitter P-334 under the
reverse gear.
(2) Install 8486-4 button to intermediate shaft.
Using arbor press ram, press reverse gear and inter-
mediate roller bearing off of shaft, while holding
remaining assembly with hand (Fig. 228).
Fig. 228 Bearing and Reverse Gear Removal
1 - ARBOR PRESS RAM
2 - ADAPTER 8486-4
3 - SEALED ROLLER BEARING
4 - REVERSE GEAR
5 - BEARING SPLITTER P-334
(3) Remove reverse gear blocker ring.
(4) Remove reverse gear needle bearing (Fig. 229).
(5) Remove 5/R synchro snap ring (Fig. 230).
Fig. 229 Reverse Gear Needle Bearing
1 - NEEDLE BEARING
Fig. 230 5/R Synchro Snap Ring
1 - SNAP RING
RS