Chrysler Dodge Caravan 2002 Manual page 1940

RS
INPUT SHAFT (Continued)
(12) Remove 3rd gear (Fig. 214).
Fig. 214 3rd Gear Removal/Installation
1 - 3RD GEAR
1 - INPUT SHAFT
2 - THRUST WASHER
3 - 3RD GEAR
4 - 4TH GEAR
5 - 5TH GEAR
(13) Inspect third gear thrust washer for signs of
excessive wear. To replace, drive off of input shaft
with suitable drift and hammer.
ASSEMBLY
NOTE: When servicing the input shaft assembly, all
snap rings MUST be replaced with new ones upon
assembly. 5th gear nut must also be replaced.
NOTE: When installing 3/4 synchronizer hub to
shaft, make sure to align oil slots on synchronizer
hub face with oil hole in the shaft splined hub jour-
nal.
NOTE: Refer to (Fig. 215) for input shaft assembly
reference.
Fig. 215 Input Shaft Assembly
6 - 5TH GEAR NUT
7 - SNAP RING
8 - INPUT BEARING (SEALED)
9 - SNAP RING
10 - 3/4 SYNCHRONIZER
T850 MANUAL TRANSAXLE 21 - 383