Chrysler Dodge Caravan 2002 Manual page 1853

21 - 296 41TE AUTOMATIC TRANSAXLE
VALVE BODY (Continued)
REMOVAL
NOTE: If valve body is replaced or reconditioned,
the TCM Quick Learn Procedure must be per-
formed. (Refer to 8 - ELECTRICAL/ELECTRONIC
CONTROL MODULES/TRANSMISSION
MODULE - STANDARD PROCEDURE)
(1) Disconnect battery negative cable.
(2) Disconnect gearshift cable from manual valve
lever.
(3) Remove manual valve lever from manual shaft.
(4) Raise vehicle on hoist.
(5) Remove oil pan bolts (Fig. 347).
Fig. 347 Oil Pan Bolts
1 - OIL PAN BOLTS (USE RTV UNDER BOLT HEADS)
(6) Remove oil pan (Fig. 348).
Fig. 348 Oil Pan
1 - OIL PAN
2 - 1/8 INCH BEAD OF RTV SEALANT
3 - OIL FILTER
(7) Remove oil filter (Fig. 349).
CONTROL
1 - OIL FILTER
2 - O-RING
(8) Remove the valve body-to-transaxle case bolts
(Fig. 350).
1 - VALVE BODY ATTACHING BOLTS (18)
2 - VALVE BODY
NOTE: To ease removal of the valve body, turn the
manual valve lever fully clockwise to low or first
gear.
Fig. 349 Oil Filter
Fig. 350 Valve Body Attaching Bolts
RS