RS
INTERMEDIATE SHAFT
DESCRIPTION
The intermediate shaft assembly (Fig. 227) is part
of the transaxle geartrain, meshes with and is driven
by the input shaft, drives the differential via an inte-
grated pinion gear, and consists of the following com-
ponents:
• Intermediate Mainshaft
• 1st Speed Gear
• 2nd Speed Gear
• 3/4 Cluster Gear
• 5th Speed Gear
• Reverse Gear
• 1/2 Synchronizer
• 5/R Synchronizer
The intermediate shaft is supported by a caged
roller bearing at the front of the transaxle, and a
sealed roller bearing at the rear of the transaxle.
1 - INTERMEDIATE SHAFT
2 - ROLLER BEARING
3 - SNAP RING
4 - NEEDLE BEARING
5 - 1ST SPEED GEAR
6 - SNAP RING
7 - 2ND SPEED GEAR
8 - 3/4 CLUSTER GEAR
9 - SNAP RING
Fig. 227 Intermediate Shaft Assembly
10 - SNAP RING
11 - SEALED ROLLER BEARING
12 - THRUST WASHER
13 - NEEDLE BEARING
14 - REVERSE GEAR
15 - SNAP RING
16 - 5/R SYNCHRO
17 - 5TH SPEED GEAR
18 - 1/2 SYNCHRO
T850 MANUAL TRANSAXLE
21 - 387