Chrysler Dodge Caravan 2002 Manual page 1925

21 - 368 T850 MANUAL TRANSAXLE
GEARSHIFT CABLE - CROSSOVER (Continued)
(9) Torque crossover lever adjustment screw to 8
N·m (70 in. lbs.). No load should be applied to
the shifter lever in any direction (hands off)
while tightening screw.
(10) Verify gearshift lever travel through all gear
ranges with engine off (not running).
(11) Install center console assembly (Fig. 158).
Install and torque center console-to-gearshift mecha-
nism screws to 5 N·m (45 in. lbs.).
(12) Install cupholder plugs (Fig. 157).
(13) Install gearshift boot to console (Fig. 156).
Secure boot to console with three (3) retainer clips.
(14) Install gearshift knob to gearshift lever (Fig.
155). Orient shift pattern on knob
push down and rotate
release. Secure boot to knob.
(15) Connect battery negative cable.
GEARSHIFT CABLE -
SELECTOR
REMOVAL
(1) Disconnect battery negative cable.
(2) Remove gearshift knob by pushing down and
rotating 1 ⁄ -turn clock-wise (Fig. 160).
4
Fig. 160 Gearshift Knob Removal/Installation
1 - GEARSHIFT KNOB
2 - GEARSHIFT LEVER
1 ⁄ -turn clockwise,
4
⁄ -turn counter-clockwise and
1
4
(3) Remove gearshift boot from center console by
disengaging at three (3) retaining clips (Fig. 161).
Fig. 161 Gearshift Boot Removal/Installation
1 - GEARSHIFT BOOT
2 - CENTER CONSOLE
(4) Apply park brake to allow park brake handle to
clear center console upon removal.
(5) Remove two (2) cupholder bottom plugs (Fig.
162).
Fig. 162 Cup Holder Plugs
1 - CUPHOLDER PLUG (2)
RS