Chrysler Dodge Caravan 2002 Manual page 1491

14a - 4 FUEL DELIVERY
FUEL RAIL
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . 4
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
REMOVAL - FUEL RAIL
INSTALLATION - FUEL RAIL
FUEL FILTER / WATER SEPARATOR
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . 5
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
FUEL LINES
DESCRIPTION
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . 6
DESCRIPTION - HIGH PRESSURE FUEL
LINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
FUEL RAIL
DESCRIPTION
The fuel rail is mounted to the cylinder head cover/
intake manifold (Fig. 1).
OPERATION
The fuel rail stores the fuel for the injectors at
high pressure. At the same time, the pressure oscil-
lations which are generated due to the high-pressure
pump delivery and the injection of fuel are dampened
by the rail volume.
The fuel rail is common to all cylinders, hence it's
name "common rail". Even when large quantities of
fuel are extracted, the fuel rail maintains a constant
inner pressure. This ensures that the injection pres-
sure remains constant from the moment the injector
opens.
REMOVAL - FUEL RAIL
(1) Disconnect negative battery cable.
(2) Remove engine cover (Refer to 9 - ENGINE -
REMOVAL).
(3) Disconnect fuel injector high pressure lines.
(4) Disconnect fuel rail supply line. (Fig. 2)
(5) Disconnect fuel rail return line. (Fig. 2)
(6) Disconnect fuel rail high pressure sensor con-
nector. (Fig. 2)
(7) Remove engine electrical harness retainers
from the fuel rail retaining bolts/studs. (Fig. 2)
(8) Remove fuel rail retaining bolts and remove
fuel rail (Fig. 2).
FUEL DELIVERY
TABLE OF CONTENTS
page
. . . . . . . . . . . . . . . . . . . 4
. . . . . . . . . . . . . . . . 5
OPERATION - HIGH PRESSURE FUEL LINES
DIAGNOSIS AND TESTING - HIGH
PRESSURE FUEL LINES
FUEL TRANSFER PUMP
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . 7
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
FUEL INJECTION PUMP
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . 7
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . 9
WATER IN FUEL SENSOR
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . 10
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Fig. 1 ENGINE COMPONENT LOCATIONS
1 - FUEL INJECTOR RETURN LINE
2 - FUEL INJECTOR HIGH PRESSURE LINE
3 - OIL SEPARATOR
4 - FUEL INJECTOR
5 - CAMSHAFT POSITION SENSOR
6 - BOOST PRESSURE/INTAKE AIR TEMPERATURE SENSOR
7 - EGR SOLENOID
8 - FUEL PRESSURE SENSOR
9 - CYLINDER HEAD COVER/INTAKE MANIFOLD
10 - FUEL RAIL
RG
page
. . 6
. . . . . . . . . . . . . . . . . 6