Chrysler Dodge Caravan 2002 Manual page 1653

21 - 96 31TH AUTOMATIC TRANSAXLE
FINAL DRIVE (Continued)
(4) Apply a bead of Mopar Silicone Rubber Adhe-
sive Sealant to the adapter plate. Load differential
assembly into position and install adapter plate.
(5) Using Tool L-4435, index adapter plate until
bolt holes align.
(6) Install adapter plate-to-transaxle case bolts
and torque to 28 N·m (250 in. lbs.) torque.
(7) Apply a bead of Mopar Silicone Rubber Adhe-
sive Sealant to the differential bearing retainer (Fig.
157).
Fig. 157 Differential Bearing Retainer (Typical)
1 - DIFFERENTIAL BEARING CUP
2 - DIFFERENTIAL
3 - DIFFERENTIAL BEARING RETAINER
(8) Install bearing retainer and index using Tool
L-4435 until bolt holes align (Fig. 158).
Fig. 158 Index Bearing Retainer using Tool L-4435
1 - GOVERNOR PRESSURE PLUG
2 - DIFFERENTIAL BEARING RETAINER
3 - SPECIAL TOOL L-4435
(9) Install and torque bearing retainer bolts to 34
N·m (25 ft. lbs.) torque (Fig. 159).
Fig. 159 Differential Bearing Retainer Bolts
1 - DIFFERENTIAL BEARING RETAINER
2 - DIFFERENTIAL BEARING RETAINER BOLTS (6)
(10) Install bearing retainer axle seal using Tool
L-4520 (inverted), and driver handle C-4171 (Fig.
160).
Fig. 160 Install Bearing Retainer Axle Seal
1 - SPECIAL TOOL L-4520
2 - SPECIAL TOOL C-4171
RS