Chrysler Dodge Caravan 2002 Manual page 1522

RS
LOCK CYLINDER HOUSING (Continued)
(8) Remove the two screws holding the metal cover
in place below the shifter/ignition interlock linkage
(Fig. 22), then remove the cover.
Fig. 22 Cover Removal/Installation
1 - IGNITION SWITCH
2 - SCREW
3 - COVER
(9) Disconnect the shifter/ignition interlock link
from the lever on the lock cylinder housing (Fig. 23).
Fig. 23 Shifter/Ignition Interlock Linkage
Disconnected
1 - LEVER
2 - LINK
3 - LOCK CYLINDER HOUSING
(10) Remove the key cylinder. To do this:
• Turn the key placing the key cylinder in the ON
position.
• Depress and hold the retaining tab on the bot-
tom of the lock cylinder housing (Fig. 24).
• Pull the key cylinder straight out of the lock cyl-
inder housing.
Fig. 24 Cylinder Retaining Tab
1 - IGNITION SWITCH
2 - RETAINING TAB
(11) Remove the vehicle wiring harness connector
from the key cylinder halo lamp (Fig. 25).
Fig. 25 Wiring Harness Connection To Halo Lamp
1 - IGNITION SWITCH
2 - STEERING COLUMN ASSEMBLY
3 - WIRING HARNESS CONNECTOR
4 - IGNITION SWITCH HALO LIGHT
(12) Remove the key cylinder halo lamp from the
lock cylinder housing.
COLUMN 19 - 19