Chrysler Dodge Caravan 2002 Manual page 1863

21 - 306 41TE AUTOMATIC TRANSAXLE
VALVE BODY (Continued)
(14) Install Manual
Transmission Range Sensor (Fig. 381).
Fig. 381 Install Manual Shaft/Rooster Comb and
Transmission Range Sensor
1 - TRANSMISSION RANGE SENSOR
2 - MANUAL SHAFT
3 - ROOSTER COMB
(15) Make sure Manual Valve control pin is con-
tained within the rooster comb slot (Fig. 382). Install
Transmission Range Sensor retaining screw (Fig.
382) and torque to 5 N·m (45 in. lbs.).
Fig. 382 Install Transmission Range Sensor
Retaining Screw
1 - TRANSMISSION RANGE SENSOR
2 - MANUAL VALVE CONTROL PIN
3 - RETAINING SCREW
Shaft/Rooster Comb and (16) Install manual shaft seal (Fig. 383).
Fig. 383 Manual Shaft Seal
1 - SEAL
2 - MANUAL SHAFT
INSTALLATION
NOTE: If valve body assembly is being replaced or
reconditioned, it is necessary to perform the TCM
Quick Learn Procedure. (Refer to 8 - ELECTRICAL/
ELECTRONIC CONTROL MODULES/TRANSMISSION
CONTROL MODULE - STANDARD PROCEDURE)
(1) Install valve body assembly to transaxle (Fig.
384). Install and torque valve body-to-transaxle case
bolts (Fig. 385) to 12 N·m (105 in. lbs.).
Fig. 384 Valve Body Removal/Installation
1 - VALVE BODY
RS