Chrysler Dodge Caravan 2002 Manual page 626

RS
SPEED CONTROL
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . 1
OPERATION
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . 1
OPERATION - INTERACTIVE SPEED
CONTROL (4 Speed EATX Only) . . . . . . . . . . . 2
DIAGNOSIS AND TESTING - ROAD TEST
SPECIFICATIONS - TORQUE
CABLE
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . 4
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . 4
SERVO
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . 4
SPEED CONTROL
DESCRIPTION
The speed control system is electronically con-
trolled and vacuum operated. The electronic control
is integrated into the Powertrain Control Module.
The controls are located on the steering wheel. The
ON/OFF, and SET buttons are located on the left side
of the airbag module. The RESUME/ACCEL, CAN-
CEL and COAST buttons are located on the right
side of the airbag module (Fig. 1).
Fig. 1 SPEED CONTROL SWITCHES - Typical
SPEED CONTROL
TABLE OF CONTENTS
page
SWITCH
. . . . . 3
. . . . . . . . . . . . . . . 3
VACUUM RESERVOIR
30 mph (48 km/h).
WARNING: THE USE OF SPEED CONTROL IS NOT
RECOMMENDED WHEN DRIVING CONDITIONS DO
NOT PERMIT MAINTAINING A CONSTANT SPEED,
SUCH AS IN HEAVY TRAFFIC OR ON ROADS THAT
ARE WINDING, ICY, SNOW COVERED, OR SLIP-
PERY.
OPERATION
OPERATION
ON switch, the PCM allows a set speed to be stored
in RAM for speed control. To store a set speed,
depress and release the SET switch while the vehicle
is moving at a speed between 25 and 85 mph. In
order for the speed control to engage, the brakes can-
not be applied, nor can the gear selector be indicat-
ing the transmission is in Park or Neutral. The speed
control can be disengaged manually by:
equipped)
SPEED CONTROL
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . 5
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . 5
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . 6
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . 6
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . 6
The system is designed to operate at speeds above
When speed control is activated by depressing the
• Stepping on the brake pedal
• Depressing the OFF switch
• Depressing the CANCEL switch.
• Depressing the clutch pedal
• Operating in 1st or 2nd gear (autostick, if
8P - 1
page