Chrysler Dodge Caravan 2002 Manual page 2095

23 - 112 WEATHERSTRIP/SEALS
FRONT DOOR GLASS RUN WEATHERSTRIP
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . 112
FRONT DOOR OUTER BELT MOLDING
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . 113
FRONT DOOR WEATHERSTRIP
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
FRONT DOOR GLASS RUN
WEATHERSTRIP
REMOVAL
(1) Remove door frame closeout moldings.
(2) Pull weatherstrip from glass run channel at
rear of door frame, working from the bottom to the
top.
(3) Disengage clip attaching weatherstrip to door
frame.
(4) Pull weatherstrip from lip along top of door
frame (Fig. 1).
(5) Remove door trim panel.
(6) Remove door speaker, if equipped.
(7) Remove watershed as necessary to gain access
to screw attaching front lower corner of glass run
weatherstrip to inner door panel.
(8) Remove screw attaching glass run weatherstrip
to inner door panel.
(9) Remove inner belt weatherstrip.
(10) Pull weatherstrip from front glass run chan-
nel.
(11) Remove glass run weatherstrip from vehicle.
WEATHERSTRIP/SEALS
TABLE OF CONTENTS
page
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . 113
SLIDING DOOR WEATHERSTRIP
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . 114
FRONT DOOR INNER BELT MOLDING
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . 114
INSTALLATION
(1) Position glass run weatherstrip on vehicle (Fig.
1).
(2) Push weatherstrip into front glass run channel.
(3) Install screw attaching glass run weatherstrip
to inner door panel.
(4) Install inner belt weatherstrip.
(5) Install watershed.
(6) Push weatherstrip groove onto lip along top of
door frame.
(7) Engage clip into slot in door frame.
(8) Push weatherstrip into channel at rear of door
frame, working from the top to bottom.
(9) Install door frame closeout moldings.
(10) Install door speaker, if equipped.
(11) Install door trim panel.
RS
page