Audio In2 Right Selection Switch (Sw17) - Analog Devices ADSP-21479 EZ-Board Manual

Table 2-13. Audio In1 Right Selection Switch (SW16)
SW16 Position
SW16.1
SW16.2
SW16.3
SW16.4
SW16.5
SW16.6

Audio In2 Right Selection Switch (SW17)

The audio selection switch (
line, connected to the AD1939's
RCA connectors or the differential DB25 connector. By default, the
switch is set up to use the RCA connectors for audio in. To use the stan-
dard, off the shelf DB25 connector to XLR cables, change the switch to
the differential setting. See
ferential In/Out Connectors (P8–9)" on page 2-28.
Table 2-14. Audio In2 Right Selection Switch (SW17)
SW17 Position
SW17.1
SW17.2
SW17.3
SW17.4
SW17.5
SW17.6
ADSP-21479 EZ-Board Evaluation System Manual
ADSP-21479 EZ-Board Hardware Reference
Single-Ended RCA IN (Default)
ON
OFF
ON
OFF
ON
OFF
) connects the right channel of the
SW17
Table
Single Ended Use RCA IN (Default)
ON
OFF
ON
OFF
ON
OFF
Differential DB25 IN (P8)
OFF
ON
OFF
ON
OFF
ON
circuit, to either the single-ended
ADC4
2-14. For more information, see "Dif-
Differential DB25 IN (P8)
OFF
ON
OFF
ON
OFF
ON
In2
2-15