Rear Bumper Removal
1. Remove the 4 bolts, washers and nuts (Fig. 216).
Fig. 216
2. Remove rear bumper from the frame (Fig. 217).
Fig. 217
TimeCutter® Z/Precision® Z Service Manual
Rear Bumper Installation
1. Install the rear bumper to the frame (Fig. 218).
PICT-9484
2. Install washers under each bolt head. On the two
outside bolts, install a large hardened washer be-
tween the bolt and the nut; the other two bolts use
regular washers. Tighten all 4 bolts, washers and
nuts (Fig. 219).
PICT-9492
CHASSIS
Fig. 218
PICT-9492
Fig. 219
PICT-9484
3
3-55