Toro Lawn-Boy TimeCutter Z Service Manual page 62

22. Pull the neutral wiring harness out of the hole
located on the backside of the seat/pods bracket.
There is one on the left side and one on the right
side (Fig. 152).
Fig. 152
23. Unplug the relay from the harness (Fig. 153).
Fig. 153
TimeCutter® Z/Precision® Z Service Manual
24. Remove the screw from the relay base and remove
the base from the seats/pods bracket (Fig. 154).
PICT-9465a
25. Remove the two screws retaining the fuse block to
the seats/pods bracket (Fig. 155).
PICT-9413
CHASSIS
Fig. 154
PICT-9417
Fig. 155
PICT-9419
3
3-39