30. Remove the two bolts and nuts retaining the lift arm
assembly to the lift lever assembly (Fig. 160).
Fig. 160
31. Remove the lift lever assembly from the lift link (Fig.
161).
Fig. 161
TimeCutter® Z/Precision® Z Service Manual
1. Install the lift lever assembly to the lift link (Fig. 162).
PICT-9430
2. Install the two bolts through the lift lever assembly.
Note the bolt location in the lift lever assembly (Fig.
163).
PICT-9435
CHASSIS
Fig. 162
PICT-9436
Fig. 163
PICT-9438
3
3-41