CHASSIS
5. Remove the shoulder bolts and nuts retaining the
seat base to the seat pivot/control assembly and
remove seat assembly (Fig. 069).
3
6. Remove the 3 shoulder screws retaining the LH pod
to the frame (Fig. 070).
3-18
Fig. 069
PICT-9257
Fig. 070
PICT-9259
7. Remove the LH pod from the unit (Fig. 071).
Fig. 071
8. Remove the four screws on the control panel and
move the control panel away from the side panel
(Fig. 072).
Fig. 072
TimeCutter® Z/Precision® Z Service Manual
PICT-9260
PICT-9225