Toro Lawn-Boy TimeCutter Z Service Manual page 88

15. Install the electric PTO clutch onto the crankshaft.
Make sure the slot of the PTO clutch engages with
the clutch stop bracket (Fig. 252).
Fig. 252
16. Torque the electric PTO clutch bolt to 50 – 60 ft-lbs.
(67.8 – 81.3 Nm), while holding the center hub of the
clutch (Fig. 253).
Fig. 253
TimeCutter® Z/Precision® Z Service Manual
17. Install the plug connector into the electric PTO clutch
(Fig. 254).
PICT-9548
18. Release the mower arm tension and install the mow-
er drive belt onto the electric PTO clutch (Fig. 255).
PICT-9550
19. Connect the negative battery cable to the battery.
ENGINE
Fig. 254
PICT-9500a
Fig. 255
PICT-9493
4
4-9