ENGINE
14. Remove the engine wire harness plug (Fig. 232).
4
15. Remove the positive starter cable from the bottom of
the starter (Fig. 233).
4-4
Fig. 232
PICT-9522a
Fig. 233
PICT-9523
16. Remove the negative battery cable and the negative
wire from the wiring harness from the top of the
starter (Fig. 234).
Fig. 234
17. Raise the engine off the frame (Fig. 235).
Fig. 235
TimeCutter® Z/Precision® Z Service Manual
PICT-9525
PICT-9529