13. Remove the battery positive cable from the battery.
14. Remove the battery hold down and remove the
battery from the battery tray (Fig. 144).
Fig. 144
15. Remove the screw from the battery tray and the
seat/pods bracket. Remove the bolt and nut from the
frame (Fig. 145).
Fig. 145
TimeCutter® Z/Precision® Z Service Manual
16. Remove the right and left neutral safety switches by
pushing the clip that retains the neutral switch to the
seat pivot/control assembly (Fig. 146).
PICT-9372
17. Remove the neutral switch from the wiring harness
(Fig. 147).
PICT-9377
CHASSIS
Fig. 146
PICT-9379
Fig. 147
PICT-9382
3
3-37