Toro Lawn-Boy TimeCutter Z Service Manual page 49

CHASSIS
3. Install an eccentric screw through the eccentric.
the seat pivot/control assembly (Fig. 100).
3
4. Install the nut on the eccentric screw and tighten
(Fig. 101).
3-26
Fig. 100
PICT-9322
Fig. 101
PICT-9315
5. With a punch installed on the end of the return plate
and spring, install the bracket return onto the seat
pivot/control assembly (Fig. 102).
Fig. 102
6. Install a screw through the bracket return and tighten
(Fig. 103). Remove the punch from the end of the
plate return.
Fig. 103
TimeCutter® Z/Precision® Z Service Manual
PICT-9330
PICT-9326