4. Remove the left hand pod from the unit. (Fig. 136).
Fig. 136
5. Remove the four screws on the control panel and
move the control panel away from the pod (Fig.
137).
Fig. 137
TimeCutter® Z/Precision® Z Service Manual
6. Remove the fuel cap and the rubber washer.
7. Remove the 3 shoulder screws retaining the right
hand pod to the frame (Fig. 138).
PICT-9260
8. Remove the right hand pod from the frame (Fig.
139).
PICT-9225
CHASSIS
Fig. 138
IMG-0455a
Fig. 139
PICT-9232
3
3-35