Toro Lawn-Boy TimeCutter Z Service Manual page 134

3. Install a plain washer on the screw for the idler
arm, friction washer-composite, spacer through the
idler arm; on the other side install a friction washer-
composite, plain washer (Fig. 406).
Fig. 406
4. Install and tighten the idler arm assembly to the
mower deck (Fig. 407).
Fig. 407
TimeCutter® Z/Precision® Z Service Manual
5. Install one end of the extension spring to the idler
arm (Fig. 408).
PICT-9905a
6. Install the other end of the spring extension to the
spring return hook (Fig. 409).
PICT-9902
7. Install the mower deck to the unit; see "Mower Deck
Installation" on page 6-13.
MOWER DECK
Fig. 408
Fig. 409
PICT-9913
6
PICT-9900
6-11