Seat Pivot/Control Assembly
Seat Pivot/Control Assembly Removal
1. Remove the negative battery cable from the battery
(Fig. 065).
Fig. 065
2. Remove the wire plug from the seat switch (Fig.
066).
Fig. 066
TimeCutter® Z/Precision® Z Service Manual
3. Remove the wire harness retainer located on the
seat base (Fig. 067).
4. Remove the hairpin and the clevis pin holding the
retaining cable stop for the seat (Fig. 068).
PICT-9219
PICT-9246
CHASSIS
Fig. 067
PICT-9251
Fig. 068
PICT-9256
3
3-17