Toro Lawn-Boy TimeCutter Z Service Manual page 87

ENGINE
11. Apply anti-seize lubricant to the engine crankshaft
(Fig. 248).
4
12. Install the engine drive pulley. Make sure side of the
pulley stamped "clutch side" is facing down toward
the electric PTO clutch (Fig. 249).
4-8
Fig. 248
PICT-9538
Fig. 249
PICT-9509
13. Install the drive belt around the engine drive pulley
by releasing the spring tension on the idler arm.
Make sure the belt is routed around both transmis-
then around the engine drive pulley (Fig. 250).
Fig. 250
14. Apply medium strength thread-locking material to the
threads of the clutch bolt before installing (Fig. 251).
Fig. 251
TimeCutter® Z/Precision® Z Service Manual
PICT-9506
PICT-9544a