CHASSIS
26. Install a cable tie through the retention tabs located
on the seat pivot/control assembly (Fig. 124).
3
27. Install the right hand pod with 3 shoulder screws
(Fig. 125).
3-32
Fig. 124
PICT-9370
Fig. 125
PICT-9262
28. Install the rubber washer and fuel cap (Fig. 126).
Fig. 126
29. Install the 4 screws retaining the control panel to the
right hand pod (Fig. 127).
Fig. 127
TimeCutter® Z/Precision® Z Service Manual
PICT-9226
PICT-9371