CHASSIS
11. Install the right and left neutral wiring harnesses
through the hole on the back side of the seat/pods
bracket (Fig. 172).
3
12. Install the 4 bolts and washers that retain the seat/
pods bracket to the frame (Fig. 173).
3-44
Fig. 172
PICT-9465a
Fig. 173
PICT-9400
13. Install the washer and cotter pin on the lift lever
assembly (Fig. 174).
Fig. 174
14. On the left and right side, install the brake cable
through the hole located in the seat/pods bracket
into the hole (Fig. 175).
Fig. 175
TimeCutter® Z/Precision® Z Service Manual
PICT-9392
PICT-9449