PTO Switch
Purpose
the safety interlock system.
Location
right side of the operator (Fig. 439).
Fig. 439
TimeCutter® Z/Precision® Z Service Manual
How It Works
contacts inside the switch electrically connect various
electric clutch and it engages.
Testing
3. Press in on the locking tabs, on each side of the
switch, and pull the switch out of the control panel.
4. Verify that there is continuity between the appro-
440).
5. Replace the switch if your test results do not corres-
pond with those given in Fig. 440.
and reinstall the wiring harness.
PICT-9737
ELECTRICAL
7
7-5