Toro Lawn-Boy TimeCutter Z Service Manual page 51

CHASSIS
11. Install the two bolts and nuts located on the backside
of the seat pivot/control assembly; tighten the bolts
and nuts (Fig. 108).
3
12. Install the two bolts and nuts located on the front of
the seat pivot/control assembly; tighten the bolts and
nuts (Fig. 109).
3-28
Fig. 108
PICT-9298
Fig. 109
PICT-9296
13. Install a bolt and nut on the top of the HOC sector
and a bolt, washer and nut on the bottom of the
HOC sector; tighten the bolts and nuts (Fig. 110).
Fig. 110
14. Install 2 bolts in the lift arm assembly. Note the loca-
tion of the bolts, since there are four holes in the lift
arm assembly (Fig. 111).
Fig. 111
TimeCutter® Z/Precision® Z Service Manual
PICT-9294
PICT-9334