The unit model and serial number plate is located on the
frame under the seat as shown (Fig. 004):
Fig. 004
The unit should be greased every 25 hours or more
often when operated in dusty, dirty, or sandy conditions.
Grease Type: No. 2 general purpose lithium base
grease.
area (Fig. 005).
Fig. 005
TimeCutter® Z/Precision® Z Service Manual
(Fig. 006).
PICT-9150
1. Park the unit on a level surface, disengage the blade
control (PTO), and turn the ignition key to "Off" to
stop the engine. Remove the ignition key.
2. Raise the front of the unit high enough to permit re-
moving the caster forks from the front axle assembly
(Fig. 007).
PICT-9154a
CHASSIS
Fig. 006
PICT-9157
Fig. 007
PICT-9158
3
3-1