Toro Lawn-Boy TimeCutter Z Service Manual page 142

5. Pull the idler pulley in the direction shown (Fig. 424)
and roll the belt off of the pulleys.
B
C
A
D
Fig. 424
Mower Decks with 2 Blades
A. Idler pulley
B. Mower belt
C. Outside pulley
The spring is under tension when installed and can
cause personal injury.
Be careful when removing the belt.
TimeCutter® Z/Precision® Z Service Manual
E
C
D. Spring
E. Engine pulley
!
MOWER DECK
6. Route the new belt around the engine pulley and
mower pulleys (Fig. 425).
C
E
B
D
Fig. 425
Mower Decks with 3 Blades
A. Idler pulley
B. Mower belt
C. Outside pulley
7. Pull the idler pulley in the direction shown and route
the belt onto the idler pulley (Fig. 425).
8. Install the belt covers over the outside spindles.
A
C
D. Spring
E. Engine pulley
6-19
6