CHASSIS
19. Install the battery to the battery tray with the battery
hold down (Fig. 180).
3
20. Install the positive battery cable to the battery.
21. Install the fuel tank to the frame (Fig. 181).
3-46
Fig. 180
PICT-9372
Fig. 181
PICT-9452
22. Install cable tie through the retention tabs located on
the seat/pods bracket (Fig. 182).
Fig. 182
23. Install the wire seat switch harness retainer to the
hole located on the seat base (Fig. 183).
Fig. 183
TimeCutter® Z/Precision® Z Service Manual
PICT-9370
PICT-9251