Mower Spindle Installation
1. Starting at the top of the spindle housing, press
bearing into the housing until it seats (Fig. 383).
Fig. 383
2. Turn the spindle housing over and install spacer in
the housing (Fig. 384).
Fig. 384
TimeCutter® Z/Precision® Z Service Manual
3. Press another bearing in until it seats (Fig. 385).
PICT-9885
4. Install the spindle shaft, bearing shield and spacer
into the spindle housing (Fig. 386).
PICT-9887
MOWER DECK
Fig. 385
Fig. 386
PICT-9889
6
PICT-9891a
6-5