Toro Lawn-Boy TimeCutter Z Service Manual page 44

19. Remove the RH and LH neutral switch and pull the
wire assembly out of the control linkage area (Fig.
081).
Fig. 081
20. Remove the shoulder screw and washer that hold
the motion control damper to the RH and LH activa-
tor assembly (Fig. 082).
Fig. 082
TimeCutter® Z/Precision® Z Service Manual
yokes for both the right hand and left hand hydro
links (Fig. 083).
PICT-9342a
22. Put a 2 x 4 piece of wood under both sides of the
mower deck and lower the mower to the lowest
height of cut (Fig. 084).
PICT-9341
CHASSIS
Fig. 083
PICT-9286
Fig. 084
PICT-9291
3
3-21