Mower Belt Maintenance; Mower Belt Routing; Mower Belt Replacement - Toro Lawn-Boy TimeCutter Z Service Manual

MOWER DECK

Mower Belt Maintenance

Mower Belt Routing

Belt routing decals:
For models with 42" decks:
For models with 50" decks:
6
6-18
Fig. 422
decal 105-7015
Fig. 423
decal 99-3943
Inspecting the Belts
Service Interval: Every 25 hours - Check the belts for
wear/cracks.
Check the belts for cracks, frayed edges, burn marks, or
any other damage. Replace damaged belts.

Mower Belt Replacement

Note: Squealing when the belt is rotating, blades
slipping when cutting grass, frayed belt
edges, burn marks, and cracks are signs of
a worn mower belt. Replace the mower belt if
any of these conditions are evident.
1. Park the machine on a level surface and disengage
the PTO switch.
2. Move the motion control levers outward to the park
position, stop the engine, remove the key, and
wait for all moving parts to stop before leaving the
operating position.
3. Set the height-of-cut at the lowest cutting position
(1-1/2" (38mm)).
4. Remove the belt covers over the outside spindles.
TimeCutter® Z/Precision® Z Service Manual