30. Install the left hand pod with 3 shoulder screws (Fig.
128).
Fig. 128
31. Install the two shoulder bolts and nuts retaining the
seat base to the seat pivot/control assembly (Fig.
129).
Fig. 129
TimeCutter® Z/Precision® Z Service Manual
32. Install the hairpin and clevis pin holding the retaining
cable stop for the seat (Fig. 130).
PICT-9259
33. Install the wire harness retainer to the seat base
(Fig. 131).
PICT-9257
CHASSIS
Fig. 130
PICT-9256
Fig. 131
PICT-9251
3
3-33