Figure 4-12 Proper outlet port tubing configuration
Figure 4-13 Connected Column Selector Module outlet port
tubing
6. Connect the outlet port from the Column Selector Module
outlet port to the outlet port on the EZ Prep using the pro-
vided tubing and hardware.
Note
For instructions on assembling the tubing connections, please
see the instruction sheet included with the hardware.
The Column Selector Module has multiple channels for retaining
the column mounting clamps. To change the channels, simply
unscrew the retainer at the end of the track, slide the column
mounting clamp off the track, and slide it in place wherever
required.
Section 4 The Column Selector Module
Automation
4-7