Table of Contents
Advertisement
Table 3-1 Queue Tab Columns
Number of Injections
Start Tube
3. Once the queue is complete, select the R
the P
button. Alternatively, you can select the "=" menu
LAY
on the first unfinished run and select the R
4. While a separation is in process, the Q
accessed to add samples to the queue. Samples that have
been completed cannot be edited. They can be viewed, how-
ever, by touching the file name corresponding the that run.
Note
The number of rows in the queue is limited to 28. Additional
samples can be added by deleting completed rows from the
queue. If there are more rows than can be displayed on
screen, up and down arrows are displayed at the top and bot-
tom of the screen which allow access to hidden rows.
5. Once the entire queue has completed, the R
displayed with the last separation. To easily view previous
separations, select the separation on the Q
select F
| O
ILE
PEN
If a sample had multiple injections, the run sequence will be dis-
played within the F
ILE
ceded by a "+" symbol. This symbol indicates there are multiple
injections with the same base file name. Names are appended
with "-I(#)" to signify the numerical order of the separation. See
Table 3-2 for an example.
Table 3-2 Naming Scheme
Name
Sample Run (user-defined; single
injection run)
Sample Run I1 (system-appended;
multiple injection run)
Sample Run I2
Sample Run I3
Section 3 The AutoSampler Module
Used in conjunction with the S
V
column to determine the
OLUMES
size of each injection.
Allows the user to optimize rack
usage by sharing the racks for multi-
ple samples or placing each sam-
ple's result into individual racks to
support multiple users.
UEUE
to view previous separations.
| O
dialogue under a single name pre-
PEN
Description
First injection.
First injection.
Second injection.
Third injection.
Automation
AMPLE
tab and press
UN
option.
UN
screen can be
screen is
ESULT
screen or
UEUE
3-23
Advertisement
Table of Contents
