Table of Contents
Advertisement
Figure 3-22 Sample probe tubing secured to the EZ Prep
Figure 3-23 Diverter Valve Waste port with no connection
Note
The tubing bracket should be affixed to the EZ Prep so that the
probe tubing threads vertically through the bracket. This
ensures that the probe tubing will not be obstructed by other
tubing.
11. Disconnect the tubing at the back of the EZ Prep from the
port labeled D
IVERTER
12. Connect the compatible tubing from the AutoSampler
Module to the port labeled D
back of the EZ Prep.
Section 3 The AutoSampler Module
V
W
.
ALVE
ASTE
V
W
IVERTER
ALVE
Automation
at the
ASTE
3-13
Advertisement
Table of Contents
