Table of Contents
Advertisement
Figure 3-4 Routing the top section of wash station tubing
Figure 3-5 Sample input tubing section assembly
4. Assemble two wash solution input tubing sections by
inserting the smaller piece of tubing directly into the
larger piece of tubing.
5. Attach the assembled wash solution input tubing sections
to the remaining fittings on the peristaltic pump. These
tubing sections are labeled "1" and "4", and are attached to
the respectively labeled fittings. The free ends will be
inserted into the wash solution container.
Note
Alternatively to Step 5, the free end of the tubing section
labeled "4" can be connected to a waste container if the user
does not wish to reuse the wash solution.
Section 3 The AutoSampler Module
Automation
3-3
Advertisement
Table of Contents
