Removing The Cleaning Cartridge - Overland Storage PowerLoader User & Installation Manual

C C
LEANING ARTRIDGE
When you press the Enter button, the In Progress screen appears.
When the cleaning operation is completed, the Default Screen reappears.

Removing the Cleaning Cartridge

1) Examine the Default Screen on the Control Panel to assure that the cleaning cartridge has
been unloaded from the drive. If not, then unload it using the Load/Unload Menu, as described
Chapter 3,
in
2) Remove the magazine from the PowerLoader using the procedure described in
Chapter 3,
3) Remove the cleaning cartridge from the magazine.
4) Insert any desired data cartridge into the slot vacated by the cleaning cartridge.
5) Insert the magazine into the PowerLoader.
6) Close the magazine door.
u
4-4 Maintenance
Clean: Clean:
Clean: Clean:
Use: Use: Use: Use:
Cleaning in Progress Cleaning in Progress
Cleaning in Progress Cleaning in Progress
Figure 4-5. Cleaning In Progress Screen
"Operation".
"Operation", "Inserting and Removing
SDLT1 SDLT1 SDLT1 SDLT1
Slot1 Slot1 Slot1 Slot1
Cartridges".