Overland Storage PowerLoader User & Installation Manual page 28

C O D
ONFIGURATION PTIONS ESCRIPTIONS
Set Auto Clean
Mode
Set Negotiation
Reserved Slots
Special Config
u
2-10 Installation
Table 2-3. PowerLoader Configuration Options
Disabled, Enabled
Negotiation Mode: Do Not
Initiate, Initiate
Transfer Rate: 10 MB/sec. Syn-
chronous, 5 MB/sec., Asynchro-
nous only
Reserved Slots: 0 through n (DLT
only)
Mode Page 1F Length: Short
(0x0E), Long (0x12)
Model Number:
OVERLAND LX, Blank Line,
COMPAQ SSL3010SL, COMPAQ
TL8 (DLT1 only), Imation DLT,
Vendor Unique
TUR Reporting: Standard: report
Not Ready; Custom: report Good
in Sequential Mod
Init. Elem. Status: No Inventory,
Force Inventory, Force Label
Scan
Unit Attn. Report: One, All
Element Base: One Based, Zero
Based
Label Size: 1 through 8
characters
Label Alignment: Left Align,
Right Align
Abort Move Status: Busy, Not
Read
SCSI Mode: SCSI-2, SCSI-3
Post Recv'd Error: Disabled,
Enabled
Tape Alert Mode: Logging Dis-
abled, No Exceptions, Unit
Attention, Rec. Error (cnd), Rec.
Error (unc), No sense, On
request
Clean Threshold: 0-255
Disabled Disabled
Do Not Ini- Do Not Ini-
tiate tiate
10 MB/sec. 10 MB/sec.
0 0
Short Short
OVER- OVER-
LAND LX LAND LX
Standard Standard
No Inven- No Inven-
tory tory
All All
One Based One Based
8 Chars 8 Chars
Left Align Left Align
Busy Busy
SCSI-3 SCSI-3
Disabled Disabled
Logging Logging
Disabled Disabled
0 0
Disabled
Do Not
Initiate
10 MB/sec.
0
Short
OVER-
LAND LX
Standard
No Inven-
tory
All
One Based
8 Chars
Left Align
Busy
SCSI-3
Disabled
Logging
Disabled
0