Using The Control Panel Buttons - Overland Storage PowerLoader User & Installation Manual

Using the Control Panel Buttons

To enter the Menu Mode and display the Main Menu from the Default Screen, press the Enter
button.
Return to the Main Menu at any time from a submenu by pressing the Escape button
repeatedly until the Main Menu appears. Pressing the Escape button while the Main Menu is
displayed exits the Menu Mode and returns the PowerLoader to the Default Screen.
To display the Show Status Menu only without entering the Menu Mode, press the Escape
button at the Default Screen. The system remains online.
Note: When you enter the Menu Mode, the Ready light goes out. This means that the
module is off-line, and the system responds to all commands from the host with
a "SCSI Not Ready" message until you exit the Menu Mode and the Ready light
goes on.
Screen Escape
At POST N/A
Screen
At Default Displays Show
Screen Status Menu
At Status Returns to
Menu (while Default Screen
online)
In Menu Mode Rejects currently
displayed choice
or
Aborts Control
Panel operation
in progress, or
Exits to next
higher menu
level, or
Exits Menu
Mode to default
screen
At Fault N/A
Screen
Table 3-2. Control Panel Button Functions
Enter
N/A
Enters Menu
Mode
Same as in
Menu Mode
Accepts Cur-
rently Dis-
played Choice
Clear Soft
Errors
Scroll Up p p p p Scroll Down q q q q
N/A N/A
N/A N/A
Same as in Same as in
Menu Mode Menu Mode
u u u u 1 Line
Moves Moves
Upward Downward
Through List of
Through List of
Options, or
Options, or
Scrolls Part of
Scrolls Part of
Display 1 Line
Display 1 Line
Toward Bottom
Toward Top of
of List of
List of Options
Options
N/A N/A
Operation
F P
RONT ANEL
u u u u 1 Line
t
3-3