Maintenance Menu; Configure Menu; Show History Menu; Security Menu - Overland Storage PowerLoader User & Installation Manual

Dependent upon the report for each location, line 3 indicates either Label Valid or Label Not
Present.
If you have added the optional bar code reader to the PowerLoader , line 4 displays the actual
bar code on the label, up to 8 characters, for each location reported. If there is no label, or if
there is no bar code reader installed, line 4 is blank.

Maintenance Menu

The Maintenance Menu and the options under it that are intended for operator use are
described in Chapter 4,

Configure Menu

The Configure Menu, how to use it and the options available under it are described in
Chapter 2, "Installation".

Show History Menu

The Show History Menu enables the operator to review the history of the module. You can
retrieve the configuration history, the original configuration, as well as statistics on the number
of operations the library robotics and the drives have performed.

Security Menu

The Security Menu allows you to lock the Control Panel and prevent unauthorized access to the
Menu Mode, which takes the PowerLoader offline.
When you lock the Control Panel, you cannot open the magazine door.
To display the Status Menu with the Control Panel locked, press the Escape button at the
Default Screen.
When the Security Menu is selected, the following screen appears:
Press the Enter button. The following screen displays:
"Maintenance".
Set Unlock Code Set Unlock Code Set Unlock Code Set Unlock Code
Figure 3-18. Security Menu
S C P D
ELECTING ONTROL ANEL ISPLAY
Operation
M
ODES
t
3-17