Overland Storage PowerLoader User & Installation Manual page 58

T R
APE EQUIREMENTS
Press the Enter button to execute the operation or the Escape button to return to cancel. The
following screen displays. If the source is a slot, the word Load displays instead of Unload on
line 4.
When the load or unload operation is finished, the Default Screen reappears. The screen is
updated to show that there is no cartridge in SDLT1 and that Slot 4 is full.
u
3-24 Operation
From : SDLT1 From : SDLT1 From : SDLT1 From : SDLT1
To: Slot 4 To: Slot 4 To: Slot 4 To: Slot 4
ENTER to Eecute ENTER to Eecute ENTER to Eecute ENTER to Eecute
ESCAPE to Cancel ESCAPE to Cancel ESCAPE to Cancel ESCAPE to Cancel
Figure 3-30. Confirmation Screen
From : SDLT1 From : SDLT1 From : SDLT1 From : SDLT1
To : Slot 4 To : Slot 4
To : Slot 4 To : Slot 4
Unload In Progress Unload In Progress
Unload In Progress Unload In Progress
Figure 3-31. Load/Unload In Progress Screen
Loader Idle Loader Idle Loader Idle Loader Idle
SDLT1: SDLT1: SDLT1: SDLT1:
SDLT2: SDLT2: SDLT2: SDLT2:
1 1 1 1
_ _ _ _ _ _ _ _ _ _ _ _ _ _
u u u u
Figure 3-32. SDLT Updated Default Screen
No Tape No Tape No Tape No Tape
No Tape No Tape No Tape No Tape
t15 15 15 15
i i i i