Overland Storage PowerLoader User & Installation Manual page 75

5015 Expired Clean'g Cart
Press Enter to Clear
5016 Not a Clean'g Cart
Press Enter to Clear
5017 No Slots Installed
Press Enter to Clear
5020 All Drvs/Slots Empty
Press Enter to Clear
5021 Bad Cartridge Map
Press Enter to Clear
5030 Bad Novram Setting
Press Enter to Clear
5031 Bad Calender Setting
Press Enter to Clear
5032 Bad Setting
Press Enter to Clear
5033 Set Density Failed
Press Enter to Clear
5034 Set Compress. Failed
Press Enter to Clear
5035 DRV Timeout Error
Press Enter to Clear
5036 DRV Timeout Error
Press Enter to Clear
5037 DRV Set Bus ID
Error
Press Enter to Clear
5038 SCSI Lock Overrides
Press Enter to Clear
5039 Invalid Unlock Code
Press Enter to Clear
503A Auto Cleaning
Press Enter to Clear
Table 5-2. Fault Symptom Codes
SOFT fault - A front panel cleaning cycle
detected an expired cleaning cartridge.
SOFT fault - A front panel cleaning cycle was
attempted with a cartridge that was not a
cleaner.
SOFT fault - A front panel cleaning cycle was
commanded while the magazine was
removed.
SOFT fault - The "MapInfo" handler could
not find any slots or drives in the cartridge
map (either empty or full).
SOFT fault - The "MapInfo" handler could
not find a valid cartridge map to report.
SOFT fault - Bad novram image - unused in
LTO.
SOFT fault - Bad calendar setting - unused
in LTO.
SOFT fault - Bad Setting.
SOFT fault - Set Density Failed.
SOFT fault - Set Compression Failed.
SOFT fault - DRV Timeout ErrorF
SOFT fault - DRV Timeout Error
SOFT fault - The SCSI id of the drive did not
verify when read after being changed
SOFT fault - The loader cannot remove a
tape from the drive because the Prevent
Medium mode has been set in the drive
SOFT fault - The front panel edit functions
are locked and an incorrect unlock code was
rejected.
Not a fault code. - The loader is auto-leaning
the drive.
F S C (FSC)
AULT YMPTOM ODES
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
t
Troubleshooting 5-13