Table of Contents
Advertisement
The table lists the available After Point Of Sale [APOS] kits.
Table 25. Upgrade kits
Kits
Bezel
BOSS
BOSS S2
Embedded management (IDSDM)
Hard drives
Hard drives SSD
Network cards (Standard PCIe
adapter LP/FH)
Network cards (OCP)
PCIe SSD card
Power cords
Power supplies
Quick sync
SD cards
TPM
Processor enablement thermal kits
Internal USB 3.0 card
Serial COM port daughter card
Topics:
•
BOSS S2 kit
•
PCIe Gen 4 NVMe enablement Kit
•
IDSDM kit
•
Internal USB card kit
•
Serial COM port kit
BOSS S2 kit
The BOSS S2 supports up to two M.2 SSDs.
NOTE:
To enable the BOSS S2 in the system, ensure that the BIOS firmware version is 1.5.5 and iDRAC firmware version is
4.30.30.30 or later.
Before you begin the installation or removal process, follow the
instructions.
Part number
Related links to service instructions
JYPW8/MPW3H (LCD)
See
See
See
C2KCJ
See
See
See
See
See
See
See
C70VC (PE) / 8XK5Y
(OEM)
See
See
See
C19XC
See
626YT
See
safety guidelines
Upgrade Kits
Installing the front bezel
Installing the M.2 SSD module
Installing the BOSS S2 controller card module
IDSDM kit
Installing the drive
Installing the drive into the carrier
Installing the LOM card and rear I/O board
Installing the OCP card
Installing an expansion card into the expansion card riser
Installing a power supply unit
Installing the MicroSD card
Upgrading the Trusted Platform Module
Installing the processor
Internal USB card kit
Installing the serial COM port
and
before working inside the system
5
Upgrade Kits
127
Advertisement
Table of Contents
