Table of Contents
Advertisement
NOTE:
The procedure to install standard, high performance (silver grade), or high performance (gold grade) fan module
is same.
2. Press the touch point on the cooling fan module until firmly connected.
Figure 32. Installing a cooling fan module
Next steps
1. If removed,
install the air
2. Follow the procedure listed in
Drives
Removing a drive blank
Prerequisites
1. Follow the safety guidelines listed in the
2. If installed,
remove the front
CAUTION:
To maintain proper system cooling, drive blanks must be installed in all empty drive slots.
Steps
Press the release button, and slide the drive blank out of the drive slot.
42
Installing and removing system components
shroud.
After working inside your system
Safety instructions
bezel.
on page 26.
on page 25.
Advertisement
Table of Contents
