Table of Contents
Advertisement
Figure 107. Installing the BOSS S2 controller card module
5. Align the M.2 SSD at an angle with the BOSS S2 card carrier.
6. Insert the M.2 SSD until it is firmly seated in the BOSS S2 card carrier.
7. Using the Phillips #1 screwdriver, secure the M.2 SSD on the BOSS S2 card carrier with the M3 x 0.05 x 4.5 mm screw.
Figure 108. Installing the M.2 SSD
8. Slide the BOSS S2 card carrier into the BOSS S2 controller card module slot.
9. Close the BOSS S2 card carrier release latch to lock the carrier in place.
108
Installing and removing system components
Advertisement
Table of Contents
