Table of Contents
Advertisement
Table 1. Features available on the front of the system (continued)
Item
Ports, panels, and
slots
2
VGA port
3
Right control panel
4
Information tag
5
Drive (10)
Figure 2. Front view of the 8 x 2.5-inch drive system
Table 2. Features available on the front of the system
Item
Ports, panels, and
slots
1
Left control panel
Icon
N/A
N/A
Icon
N/A
Description
● Quick Sync 2 (wireless): Indicates a Quick Sync enabled
system. The Quick Sync feature is optional. This feature
allows management of the system by using mobile devices
that are called as OpenManage Mobile (OMM) feature.
Using iDRAC Quick Sync 2 with OpenManage Mobile (OMM)
aggregates hardware or firmware inventory and various
system level diagnostic and error information that can be
used in troubleshooting the system. For more information,
see the iDRAC User's Guide available at
www.dell.com/idracmanuals
Enables you to connect a display device to the system. For more
information, see the
www.dell.com/poweredgemanuals
Contains the power button, USB port, iDRAC Direct micro port,
and the iDRAC Direct status LED.
The Information tag is a slide-out label panel that contains
system information such as Service Tag, NIC, MAC address, and
so on. If you have opted for the secure default access to iDRAC,
the Information tag also contains the iDRAC secure default
password.
Enables you to install drives that are supported on your system.
For more information about drives, see the
poweredgemanuals
section.
Description
Contains the system health, system ID, status LED, and the
iDRAC Quick Sync 2 (wireless) indicator.
NOTE:
The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
● Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For
more information, see the Status LED indicators section.
● Quick Sync 2 (wireless): Indicates a Quick Sync enabled
system. The Quick Sync feature is optional. This feature
allows management of the system by using mobile devices
that are called as OpenManage Mobile (OMM) feature.
Using iDRAC Quick Sync 2 with OpenManage Mobile (OMM)
aggregates hardware or firmware inventory and various
system level diagnostic and error information that can be
https://
section.
www.dell.com/
System overview
9
Advertisement
Table of Contents
